DX-WIRE HDL cut for your needs
Aerial wire made of stainless steel / copper
Core 19 x 0.30 mm stainless steel AISI316
braided with 80 x 0.10 mm copper (tinned)
Stainless steel cross-section of approximately 1.34 mm2
Copper cross-section approximately 0.64 mm2
Insulation of polyethylene (PE), black
Overall outside diameter of 3.1 mm
Weight about 21g / m
Breaking load of approximately 190 kg
Made in Germany !
We can cut any desired length!
Type HDL: "heavy duty litz" wire is intended for most difficult conditions. The 1,5 mm diameter core consists of 19 strands of high-quality (V4A) stainless steel wrapped in a coat of 80 tinned copper strands of 0,1 mm diameter each. A high-grade insulation of uv-resistant, black polyethylene grants protection against the weather and mechanical strains. The core of stainless steel secures the enormous breaking load of 190 kg at a gross diameter of only 3 mm and moderate weight.
The coat of thin copper wires at the surface provides optimal conductivity for RF-currents flowing merely at the surface due to the skin effect. In this wire 0,64 sq.mm of copper equal the RF-conductivity of a stranded copper wire with a cross section area of 2,5 sq.mm. Unfortunately the manufacturing of this wire requires a lot of effort and such a product has its price.
We recommend 3 or 4mm duplex clamps
for this DX-WIRE HDL litz.
For dismanteling a hot air gun might be
usefull to make the polyethylen jacket a bit softer.