1,80EUR / piece
incl. 19% VAT plus shipping costs (to DE)
Scaled Prices
from 10 pieces1,70EUR - you save 0,10EUR
from 20 pieces1,60EUR - you save 0,20EUR
from 50 pieces1,50EUR - you save 0,30EUR
available within 3 to 7 daysavailable within 3 to 7 days **

spreader SP200

Strongly profiled design for 190mm spacing with central hole of 4,2mm dia.
Due to the stop-bars, this spreader allows to built 4-wire-feeders or broadband 4-6 wire birdcage-antennas.
For wire diameter from 2,0 - 3,3 mm.
For the 6-wire-birdcage 2 adapters ASP-16 are needed, allowing to screw 3 spreaders easily together in 60 deg angle.
Further informations see ASP-16.

Recommended distance between spreaders approx. 150cm


material Bayer Bayblend T65 (ABS/PC) listed in UL-94 (USA)
colour black
operational temp. -50 to +90 deg C
UV-resistant yes
weight 9,5 g
length 200mm for 190mm spacing
wire diameter 2 - 3,5 mm


directions to our spreaders SP-50 to SP-200

The following instructions - referring to spreader 120mm (SP-120) - is generally valid for all of our spreaders from SP-50 , SP-120 , SP-150 to SP-200. For the smal spreader SP-50, points 1 - 3 only are valid, because of the other construction, replacing the center hole by a circular groove. This and the center hole are designed for guiding the ladderline around an obstacle with a thin nylon rope. Also this hole is prepared for mounting 4-wires-feeders or 6-wire-cage-antennas. This is easy to do by screwing 2 or 3 spreaders together by applying our adapters ASP-16.


                                                       Here: Spreader 120mm SP-120

The two clamp-forks (1) are made for holding the 2 wires in position, due to the angular guidance (2), the looking device (3) and the wire tension. The hole (4) and the adjacent lock (5) allows to screw two spreaders together in 90deg position for preparing 4-wires-feeders or 4-wires.cage-antennas. By using our adapter ASP-16, perfect 6-wire-cage-aerials with the spreader SP-200 are very easy o realize!

We explicit say to avoid ladderlines to be bent in sharp angles! To avoid this, the holes in our spreaders are made for supporting the line and to guide it in a softly curved way: by thin nylon rope through the hole and its end to be fastened somewhere nearby! To distance from spreader to spreader may be 100 to 200cm. Lower values are possible in curved positions. In case of very long or heavy ladderlines, we recommend our insulators IS-120, which can be introduced in the ladderline by its 2 hooks. The necessary line support to be made through the 2 bows of the insulator.

Customers who bought this product also purchased

We Also Recommend